Heavy metal application of response surface optimized‑lipopeptide biosurfactant produced by Pseudomonas aeruginosa strain CGA‑02 in low‑cost substrate

Abstract

Cost-efective methods of biosurfactant production with minimal environmental impact are needed as global demand continues to increase. This study evaluated lipopeptide biosurfactant production in a Pseudomonas aeruginosa strain CGA-02 using a low-cost carbon substrate. The structural properties of the biosurfactant and applicability of the biosurfactant in heavy metal removal were evaluated. Response surface methodology (RSM) involving central composite design (CCD) was used to optimize process parameters to maximize biosurfactant production. The study identifed sugar cane molasses and sodium nitrate as carbon and nitrogen sources of choice for bacterial growth and biosurfactant production, with a relatively 2.64-fold increase in biosurfactant yield under optimized conditions. Analysis of the biosurfactant measured a surface tension reduction of water from 72.2±0.26 to 30.5±0.2 mN/m at 40 mg/L critical micelle concentration. GC–MS and FTIR analysis revealed structural properties of the lipopeptide biosurfactant, with fatty acid components predominantly 9-octadecenoic acid (oleic acid), n-hexadecanoic acid, cyclotetrasiloxane and trimyristin, and infrared peaks belonging to amine, carboxyl, nitrile, alkanol, ether and carbonyl groups. Capture of heavy metals using the biosurfactant was evaluated in soil microcosms. Removal rates of 80.47, 100, 77.57, 100, and 97.57% were recorded for As, Pb, Hg, Cd and Cr respectively after 12 weeks of incubation. There was no signifcant diference (p<0.05) in the removal efciency of the biosurfactant and an analogous chemical surfactant, sodium dodecyl sulphate. First and second-order kinetic models described heavy metal removal rates by the biosurfactant. We demonstrate the production of a useful biosurfactant using low-cost waste carbon.